Aqara Curtain Driver E1 (Rod Version) – REQUIRES AQARA HUB

xxx REQUIRES AQARA HUB TO WORK AND IS SOLD SEPARATELY xxx

Please check availability of Aqara Hubs:

AQ-HUB-CAM-G2H-Pro or

AQ-HUB-CAM-G3 o

AQ-HUB-M1S-G2, or

AQ-HUB-M2

Just hang the Curtain Driver onto the rail, and start enjoying automated control of your existing curtains based on weather, time, or other Aqara devices triggered.

MAIN FEATURES:

UP TO 1-YEAR BATTERY LIFE:

Energy-saving technologies and a huge 6000 mAh battery make the Curtain Driver E1 apparently the most long-lasting controller of its type. You can forget about charging it for up to a year.

ZIGBEE 3.0 PROTOCOL:

Enjoy the benefits of the fastest, most stable, and energy-efficient smart home technology. Better stability and compatibility (more standardized protocol), longer support, and more features.

POPULAR CURTAIN TRACK SUPPORT:

The Curtain Driver E1 supports practically any type of curtain rod. Rod Version supports all the types, while the Track Version only supports U- and I-Rails (search for “Aqara Curtain Driver E1 (Track Version)” on Raines Africa).

BUILT-IN LIGHT SENSOR:

The built-in light sensor allows the Curtain Driver E1 to be controlled automatically based on the actual brightness: if it's too bright outside, the curtains will open by themselves and vice versa!

MAXIMUM LOAD OF 12 KG:

The Curtain Driver E1 can pull even the heaviest curtains: thanks to its powerful motor, the maximum load can reach up to the record 12 kilograms!

EASY INSTALLATION:

The installation is very fast and does not require any additional tools, the Curtain Driver can simply be mounted onto the existing curtain rails.

USB-C FOR CHARGING OR POWER SUPPLY:

The most modern and versatile Type-C port is used for charging or even powering the device constantly.

(Please note: constant powering requires the cable to be placed freely to prevent it from being tangled).

ONE-BUTTON REMOTE CONTROL:

Thanks to the Aqara Home app, the full operation of your curtain can be done by pressing only one button, alternatively one can use other Aqara controllers such as the Aqara Mini Switch. Alternatively, Aqara Cube T1 Pro can be used to adjust the open rate by turning.

HOMEKIT AND OTHER ECOSYSTEM SUPPORT:

Compatible with the most popular ecosystems and can be controlled by voice. HomeKit, Alexa, Google, IFTTT, and Matter are supported.

DEVICE GROUPING SUPPORT:

You can choose between one or two Curtain Drivers per window.

In case of installing two, they will be able to be grouped together so that they open the curtains simultaneously!

SMART HOME AUTOMATION BY TIME, WEATHER, AND MORE:

Connect the device to the Aqara Home app, and you will be able to forget about operating the device manually: after configuring the automation, it will be controlled by time, weather, or other Aqara devices!

ADJUSTABLE OPENING SPEED AND SCENES:

The speed of the motor can be adjusted, so it will work more silently and open the curtain slowly to make your waking up more comfortable. Also, it supports device scenes, which allow you to set the curtain opening duration for up to several hours and open the curtain gradually so that it would feel like a real sunrise!

The actual battery life may vary depending on curtain weight, track length, and friction.

The Rod Version supports Rods, U-Rails, and I-Rails and the Track version supports U-Rails and I-Rails.

AUTOMATION EXAMPLES:

1. Curtains will open automatically based on time, weather, lighting conditions, or other Aqara devices

In the mornings, the curtains will open slowly right before you wake up to make your mornings more pleasant. When the sun is too bright, the curtains will partially close. Finally, the curtains will open right before the sunset, so you can enjoy the view. Everything is configurable in the Automations section of the Aqara Home app.

(Aqara Curtain Driver E1 + Hub)

The curtains will close when you go to bed

At bedtime, an Aqara Motion Sensor located at the top of your bed will trigger the Curtain Driver E1 to close your curtains, so you can sleep more comfortably and have pleasant dreams.

(Aqara Curtain Driver E1 + Hub + Motion Sensor)

Bedroom curtains will close automatically when you are taking a shower

An Aqara Temperature and Humidity Sensor will trigger the Curtain Driver E1 to close the bedroom curtains when the humidity level rises in the bathroom, and your privacy will be protected when you come out of the bathroom.

(Aqara Curtain Driver E1 + Hub + Temperature and Humidity Sensor)

SPECIFICATIONS:

– Color: White

– Model: CM-M01

– Dimensions: 140.5 96 44 mm

– Battery: Rechargeable Li-Ion (Not Replaceable)

– Wireless Protocol: Zigbee 3.0

– Operating Temperature: -10 C ~ 50 C

– Operating Humidity: 0-95% RH, no condensation

– What is in the Box: Curtain Driver E1 1, USB-C to USB-A Cable 1, User Manual 1, Curtain Clamp 1 (Rod Version Only), Plastic Tape 1 (Rod Version Only)

PLEASE NOTE:

– One Aqara ZigBee 3.0 Hub can connect up to 128 Aqara devices.

– To control this Apple HomeKit-enabled accessory, iOS 10.3 or later is recommended.

– Controlling Apple HomeKit-enabled accessories automatically and away from home requires an Apple TV with tvOS 10.2 or later or an iPad with iOS 10.3 or later or a Home Pod set up as a home hub.

INSTRUCTIONS:

Curtain description

If you are using grommet curtains, the minimum spacing between two grommets should be greater than 95mm.

If you are using ring-top curtains, the thickness of the rings should be greater than 4mm.

Rod diameter requirement: 25-32mm (corresponding to circumferences of 79-100mm)

Note: This product is only applicable to rods with uniform thickness, not to those with different thicknesses at the ends, such as telescopic rods.

The Rods shall be provided with close-fitting decorative caps.

Quick Start Guide

Please read the following steps to start using the product.

Preparation before use:

1. This product needs to be connected with the Aqara Home app before being installed on the curtains.

2. Before activating the product, please make sure you have the Aqara Home app and the Aqara Zigbee 3.0 hub installed (Please scan the QR code in the instruction manual to download the app).

3. Please open the app, tap Home and then tap + in the top right corner to enter the Add Device (Accessory) page. Select Curtain Driver E1 and the hub to be connected to, and add it according to instructions in the Aqara Home app. Press and hold the Setting button for 5 seconds, and wait for the voice prompt from the Hub.

4. If you have purchased two or more Curtain Drivers, please connect all of them to the Aqara Home app before further installation.

5. If you use double-sided curtains, it is necessary to connect two Curtain Drivers to the app and then put them in one group for simultaneous control. Enter the main page of the Curtain Driver to be grouped, click “… ” in the upper right corner, select Create a group for Curtains and follow the instructions.

6. It is recommended to fully charge the product before installation.

7. The mass and the dimension of the curtain to be driven shall be compatible with the rated torque and rated operating time.

Installation Methods Installation Methods for Rods

Single-Sided Curtains (only one Curtain Driver is needed)

1. Force apart the standard Rod hanger, hang it between the first and second rings (or grommets) on the movable side of the curtain, and tighten the four legs of the hanger;

Hold the sides of the hanger to lightly force it apart;

Pinch the ring hole until a “click” is heard;

2. After startup, quickly double tap the “Setting button” to release the hook on the curtain driver until it reaches its maximum length, and completely close the curtain;

3. Hang the curtain driver on the hanger as shown in the figure in the instruction manual, and quickly double tap the “Setting button” to hold the curtain driver onto the rod. Then, the indicator will turn green and blink, and 3 short beeps will sound from the buzzer when the product it is held in place.

This product can be configured on the app to open and close the curtains according to the intensity of ambient light.

To use the function, the light sensor should face the outside of the window and the Curtain Driver should be installed on the side near the window.

If you need to control the opening and closing of curtains according to the light indoor, the light sensor should face the interior and the Curtain Driver should be installed on the side near the interior. To optimize the effect of the light sensor, please ensure that there is no opaque object in front of it.

Install clips and rubber strip (for curtains suitable for Grommets)

1. First, measure the number of holes “N” between the outer edges of two adjacent Grommets with the rubber strip as shown in the figure in the instruction manual (measure the shortest straight-line distance between the outer edges of the Grommets);

2. Install the first clip onto the third hole from the left of the rubber strip, and install all the other clips according to the following instructions.

Reserve 5 holes between the second and first clips, and the number of holes between the other adjacent clips is “N 2” (including the hole occupied by the clip)

3. Please install the rubber strip together with the clips on the curtain according to your curtain layout as shown in the instruction manual.

Double-Sided Curtains (two Smart Curtain Drivers are required)

When the curtains on both sides have completely closed, install the two curtain drivers at the positions shown in the figure in the instruction manual and refer to the installation method for single-sided curtains.

Opening Distance Settings

To ensure proper use of the product, the range should be set for the product after the product is installed.

Single-Sided Curtains

1. After the device is connected to the Aqara Home app, the opening distance of the device can be configured on the app. Click the device card on the Home page of the app and set the stroke as instructed on the main page of the device.

2. Also, the opening distance of the device can be set by pressing the setting button when the device is not connected to the Aqara Home app. Detailed operations are as follows:

A) Pull the curtain until it is completely closed, and install the Curtain Driver on the rod according to the installation method for the “single-sid-

ed curtains”.

B) Then click the setting button 3 times in succession quickly to set the first limit point of the range. The first limit point is set successfully after the long “beep”.

C) Meanwhile, the Curtain Driver will automatically run to the opening limited point and stop after being pulled in the fully opening direction for about 10cm. After the long “beep”, another limit point is automatical- ly and successfully set, which means the opening range of the device is set up.

Double-Sided Curtains

A) Pull the curtains on the left and right sides until they are completely closed, and install the two Curtain Drivers at the position on the rod where the curtains are completely closed according to the installation method for the “single-sided curtains”.

B) Set the opening distance for Curtain Drivers on the left and right sides according to Steps B and C for that “single-sided curtains”.

Button Operation:

Button Operation / Description

– Click once: Open, close, or stop according to the current state of the Curtain Driver

– Click twice in succession quickly: Hold, release or stop according to the holding status of the current Curtain Driver

– Click three times in succession quickly: Set the limit point of the range manually

– Click five times in succession quickly: Delete the current range set for the Curtain Driver

– Touch & hold for 5 seconds: Restore factory settings or startup (when it is turned off)

– Touch & hold for 10 seconds: Turn off the device

Indicator Light Description

Indicator Light Status/Description

– Quick blinking of blue light: The Curtain Driver is connecting with the hub (After the device is started for use for the first time or reset).

– Slow blinking of orange light: Firmware updating is in progress.

– Quick blinking of green light: Holding to the rail is in progress.

– Green blinking: Releasing from the rail is in progress.

– White blinking: The device is being charged.

– Steady blinking of White light: Charging is complete and the adapter is not removed.

Buzzer Description:

Buzzer Status/Description

1. Long beep:

Factory settings restored.

Device searching reaction.

Opening and closing directions switched. The range limit point was set successfully.

2. Short beeps:

When the range of the Curtain Driver is not deleted, set the limit point of stroke manually.

When the range of the Curtain Driver stroke is deleted, delete the range again.

3. Short beeps:

The curtain driver is held in place. The curtain driver is released in place. Warning of low battery.

Battery Charging

When there is a warning of low battery, please charge the Curtain Driver in a timely fashion. Charging steps are as follows:

1. Quickly click the setting button twice in succession or use the app to release the Curtain Driver from the rail, and remove it from the rail;

2. Use the USB charging cable, and plug the end of the Type-C plug into the charging port on the Curtain Driver and the other end to the adapter for charging.

3. It takes about 5 hours to fully charge the battery.

Hold, release or stop according to the holding status of the current Curtain Driver

Set the limit point of the range manually

Delete the current range set for the Curtain Driver

Restore factory settings or startup (when it is turned off)

Warnings:

1. WARNING: Important safety instructions. Follow all instructions since incorrect installation can lead to severe injury. It is important for the safety of persons to follow these instructions. Save these instructions.

2. WARNING: the driver should be disconnected from its power source during cleaning, maintenance, and when replacing parts.

3. Frequently examine the installation for imbalance and signs of wear or damage to cable springs and fixings. Do not use if repair or adjustment is necessary.

4. Repairs must be performed by authorized personnel only or you will void your warranty.

5. Do not operate when maintenance, such as window cleaning, is being carried out in the vicinity.

6. Fixed controls must be clearly visible after installation.

7. Before installing the drive, remove any unnecessary cords or components and disable any equipment not needed for powered operation.

8. That the characteristics of the driven part must be compatible with the rated load and rated operating time.

9. This appliance contains batteries that are non-replaceable.

10. This appliance should not be used by children aged 8 years and under and persons with reduced physical, sensory or mental capabilities.

11. Children should not play with the appliance.

12. Cleaning and user maintenance should not be done by children.

13. Do not allow children to play with fixed controls.

What’s in the box
1 x Aqara Curtain Driver E1
1 x USB-C to USB-A Cable
1 x User Manual
1 x Curtain Clamp (Rod Version Only)
1 x Plastic Tape (Rod Version Only)