MECER Winner Pro 1000VA (1000VA/800W) On-Line Tower UPS (Uninterruptable Power Supply)

Features
True double-conversion online UPS
Wide input voltage range (110-300 VAC)
Input power factor correction 0.99
Output power factor 0.8
Converter mode available
ECO mode operation for energy saving (only available for 1-3KVA)
Generator compatible
Smart SNMP works well with either USB or RS-232 together (SNMP NETWORK CARD need to be purchased separately)

Back Time (Minutes)
25% Load 200W: 21 minutes
50% Load 400W: 7 minutes
75% Load 600W: 4 minutes
100% Load 800W: 2 minutes

Note:
Data given are the average values, not the minimum values.
A UPS is not designed to provide continuous power, merely a window period that allows a computer or other user to finalise the work at hand and shut down. It's ability to do this is dependent on the number of devices connected to the UPS.
To establish what you can and cannot connect, calculate the total wattage you need to supply and ensure that the UPS you purchase meets that requirement.

Specifications
Phase: Single phase with ground
Capacity: 1000 VA / 800 W

INPUT
Voltage Range
Low Line Transfer: 160 VAC/140 VAC/120 VAC/110 VAC 5% (Ambient Temp.<35 C)
(based on load percentage 100% – 80 % / 80 % – 70 % / 70 – 60 % / 60 % – 0)
Low Line Comeback: 175 VAC /155 VAC/ 135 VAC /125 VAC 5 % (Ambient Temp.<35 C)
(based on load percentage 100% – 80 % / 80 % – 70 % / 70 – 60 % / 60 % – 0)
High Line Transfer: 300 VAC 5 %
High Line Comeback: 290 VAC 5 %

Frequency Range: 40Hz ~ 70 Hz

Power Factor: 0.99 @ nominal voltage

OUTPUT
Output Voltage: 200/208/220/230/240 VAC
AC Voltage Regulation (Batt. Mode): 1%
Frequency Range (Synchronized Range): 47 ~ 53 Hz or 57 ~ 63 Hz
Frequency Range (Batt. Mode): 50 Hz 0.25 Hz or 60Hz 0.3 Hz
Current Crest Ratio: 3:1
Harmonic Distortion: 3 % THD (Linear Load), 6% THD (non-linear load)

Transfer Time
AC Mode to Batt. Mode: Zero
Inverter to Bypass: 4 ms (Typical)
Waveform (Batt. Mode): Pure Sinewave

EFFICIENCY
AC Mode: 88%
Battery Mode: 83%

BATTERY
Battery Type: 12 V / 9 Ah
Numbers: 2
Typical Recharge Time: 4 hours recover to 90% capacity
Charging Voltage: 27.4 VDC 1%

INDICATORS
LCD Panel: UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

ALARM
Battery Mode: Sounding every 4 seconds
Low Battery: Sounding every second
Overload: Sounding twice every second
Fault: Continuously sounding

PHYSICAL
Dimension, D x W x H (mm): 282 x 145 x 220
Net Weight (kgs): 9.8

ENVIRONMENT
Humidity: 20-90 % RH @ 0- 40 C (non-condensing)
Noise Level: Less than 50dB @ 1 Meter

MANAGEMENT
Smart RS-232/USB: Supports Windows 2000/2003/XP/Vista/ 2008, Windows 7/8, Linux, Unix, and MAC
Optional SNMP (SNMP NETWORK CARD need to be purchased separately): Power management from SNMP manager and web browser
NOTE 1: Derate to 80% of capacity in CVCF mode or when the output voltage is adjusted to 200/208VAC.
NOTE 2: If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m.

What’s in the box
1 x UPS Unit
2 x MALE TO FEMALE EXTENSION POWER CORD IEC C13-C14 (From UPS to PC)
1 x USB Cable (From UPS to PC)
1 x VGA Cable
1 x Driver Disk
1 x User Guide